Aug 29, 2019

Why Recession in Construction Sector?

Why Recession in Construction Sector? 

Be careful while spending. Heavy recession ahead.

There is an unannounced financial crisis in India. Such crises appear to the public slowly. I consider the current situation is only the first round of crisis.




1. Increasing the NPA of banks means. Scarcity of capital which means no fresh investment. The glorification of bankrupt law and Continuous scams in companies

2. Homes are not being sold which means the sale of steel, cement, bathroom fittings, construction declining. With these banks, NPAs will grow. These NPAs go deep into individual level by making the crisis deeper,

3. Vehicle sales are declining. At present, the first time in the country sale of two-wheelers is showing negative growth. Maruti has cut down production by 50%. Many of the auto dealers are closing down. This means there is a substantial reduction demand for steel, tyre, and other accessories.


The above three things are meant to be the end of the crores of jobs and the reduction of government's tax revenues. In such a situation, the government becomes frustrated and wants to complete its loss by putting taxes on everything, The government hands over the profits in private hands and puts the deficit in the government account. In such a situation, the government properties are sold in multiples of their favorite corporate and the losses increase.

Crisis in India will be visible around March 2020, Most of the average Indians are unaware of this.  It's time to be careful when you are not able to sell soap, shampoo, and detergent.

For the past few years, even the  FMCG sector is also in the grip of recession-. Do you remember when you have last seen Baba Ramdev's Patanjali Company's advertisement?  Patanjali was most active on TV about 2 years back., but for last one year, the condition of even Patanjali which grew at the fastest pace in India's FMCG market is alarming. Sales of Patanjali's products is shrinking.  Apart from this, Patanjali Ayurveda has shown a 10% Revenue Deficit in FY 2018. Not only companies such as Patanjali but Hindustan Lever also have come down in growth. Demand for fast-selling consumer goods such as soap, toothpaste, hair oil, biscuits, etc. has decreased considerably in rural areas. This has also slowed down the performance of those businesses, which are dependent on healthy rural demand. It includes FMCG, two-wheeler and auto companies that make entry-level cars.


Now come on the transport-According to the report of the Indian Foundation of Transport Research and Training, a 15% drop in truck rentals has reported since November 2018.  Also, Fleet Utilization has dropped more than that. All 75 trunk routes, rentals have gone down substantially. Between April and June, Fleet Utilization has decreased by 25% to 30% compared to the first quarter of last year. This also reduces the income of transporters by about 30%. Many operators may also come in the Fleet's EMI default in the next quarter.

There is a clear impact on freight demand because of a reduction in industrial production. Demand from the manufacturing sector, which contributes the most to truck transport, is at a minimum level. Consumers spending in cities and rural areas have reduced and transportation in agriculture has almost become sluggish after the peak demand of April. In June, the demand for fruits and vegetables by FMCG has decreased by 20%.

Due to the decrease of the freight demand, the truck fleet has reduced by 30% on all major routes of the country in the first quarter.

All the above factors are directly affected to growth, and growth is indirectly affected to the construction industry. each and every growth need more infrastructure like, new building, machinery, roads, water connection, drainage line, electricity, internet, etc. but if any company growing need in fracture but from last few years no any company want more infrastructure another side they are reducing their production, staff, resources, etc. therefore construction industry is affecting more day by day. 



Hope about recession will end early, and all will grow day by day.







(Source: Social Media)

Team 
CBEC India

Aug 21, 2019

Thumb Rules for Highrise Building to guide Civil Engineers, Contractors, Builders & Developers

Thumb Rules for Highrise Building



Thumb rule requirement of standard materials and standard calculation in high raised building

1. Steel =3 to 5 kg / sqft
2. Cement =0.5bags/ sqft
3. RMC =0.05 m3/sqft
4. Block =12.5 nos /sqm
5. Electrical cast = Rs 133/sqft
6. Plumbing cost = Rs 126/sqft
7. Fire fighting cost = Rs 40/sqft
8. External development = Rs 94.5/sqft
9. Civil works-Structure = RS 751.25/sqft
10. Finishing works = RS 467.50/sqft


Thumb rule of Cement Constant

1. 200 mm in cm 1:6 =0.124Bags /sqm
2. 200 mm in cm 1:4 =0.206 bags/sqm
3. 150 mm in cm 1:6 =0.093 bags/sqm
4. 150mm in cm 1:4 =0.144 bags/sqm
5. 100 mm in cm 1:4 =0.103 bags/sqm
6. Ceiling plastering =0.11 bags/sqm
7. Wall plastering =0.09 bags/sqm
8. Rough plastering =0.09 bags/sqm
9. Duct plastering =0.09 bags/sqm
10. External plastering =0.175 bags/sqm
11. lathen plastering =0.55 bags/sqm
12. stucco plaster =0.175 bags/sqm
13. 100 mm plaster band =0.012 bags/rmt
14. PCC 1: 4: 8 =3.4 bags/cum
15. PCC 1:5:10 =2.52 bags/cum
16. PCC 1:3:6 =4.2 bags/cum
17. PCC 1:2:4 =6.02 bags/cum
18. 230 mm brick =0.876 bags/cum
19. 115 mm brick work =0.218 bags/cum
20. VDF 100 mm thick =0.82 bags/sqm
21. Granolithic flooring =40 mm 0.35 bags/sqm
22. Granolithic flooring =20 mm 0.28 bags/sqm
23. Anti-skid =0.28 bags/sqm
24. Ceramic =0.28 bags/sqm
25. Vertified tile flooring =0.28 bags/sqm
26. Vertified tile dado =0.27 bags/sqm
27. Ceramic dado =0.27 bags/sqm
28. Marble flooring =0.3 bags/sqm
29. 100 mm ht marble skerting =0.027 bags/rmt
30. Marble glading =0.27 bags/sqm
31. Terracota tle flooring =0.3 bags/sqm
32. Mangalore tile =0.3 bags/sqm
33. Door frame fixing =0.17 bags/sqm
34. Water proofing for sunken slab =0.23 bags/sqm
35. Waterproofing for walls =0.23 bags/sqm
36. Water proofing for balcony/toilets =0.65 bags/sqm
37. Anti terminate treatment chemical Name is chlorpyrifos 20 %.
38. Diluting 5 Lit of Chemical with 95 Lit of water and usage is 7.5 Sqm Per liter {Diluted}.
     To Provide 1” Dia hole And Deep 1 Foot



Labour Productivity thumb rule:-

Brickwork
1 mason 1 Men mazdoor 1.25 sqm
1 Women Mazdoor

Wall Plastering
1 mason
1 Men mazdoor 10 sqm
1 Women Mazdoor

Ceiling Plastering
1 mason
1 Men mazdoor 8 sqm
1 Women Mazdoor

External Plastering
1 mason
1 Men mazdoor 8 sqm
1 Women Mazdoor

Blockwork 8”
1 mason
1 Men mazdoor 10 sqm
1 Women Mazdoor

Blockwork 6”
1 mason
1 Men mazdoor 8 sqm
1 Women Mazdoor

Blockwork 4”
1 mason
1 Men mazdoor 8 sqm
1 Women Mazdoor

Carpenter
1 Skilled
1 Un skilled 4 Sqm

Bar bender
1 Skilled
1 UN skilled 200Kg

Tile work
1 Mason
1M Mazdoor 10 Sqm

Paint
Painter skilled OBD 600 Sft
Emulsion 800 Sft
Putty 600 Sft
Primer 800 Sft

External Painting
Ace-Low quality
Apex-Medium Quality
Apex ultima –High Quality


The miscellaneous thumb rules in construction:-

One Sqm = 10.763Sft
One Cum = 35.314 Cft
One Acres = 4046.873
Sqm = 43560.17
Sft = 4840.019Yards
One Cubic meter = 1000 liter
One Meter = 3.280Feet
One Mile = 1609.344 meter
One Acre = 100 cent
One ground = 2400
Sft = 5.51 cent
½ ground = 2.75 cent
One Mile = 8 Furlong
One cement bag = 1.25 Cft
One Forma box = 1*1*1.25 feet


THUMB RULES FOR CONCRETE MIX DESIGN

FOR ADDING 4 LITERS OF WATER IN 1 CU.M FRESHLY MIXED CONCRETE

1. The slump value will be increased by 25 mm.
2. The compressive strength of concrete will be decreased by 1.5 to 2.0 N/mm2
3. The shrinkage potential will be increased by 10%.
4. 1/4 bag of cement will be wasted.

IF THE TEMPERATURE OF FRESHLY MIXED CONCRETE IS INCREASED BY 1%, THEN

1. 4 liters of water per cu.m will give equal slump.
2. The air content will be decreased by 1%.
3. The compressive strength of concrete will be decreased by 1.0 to 1.5 N/mm2.

IF THE AIR CONTENT OF FRESHLY MIXED CONCRETE IS

1. Increased by 1% then the compressive strength will be decreased by 5 %.
2. Decreased by 1%, the yield will be decreased by 0.03 cu.m per 1 cu.m.
3. Decreased by 1%, then the slump value will be decreased by about 12.5 mm.
4. Decreased by 1%, then the durability of the concrete will be reduced by 10%.


The following are some of the rules of thumb which will be useful to achieve economy:


1. Minimize floor-to-floor height:

By minimizing the floor-to-floor height, the cost associated with mechanical services, stairs, exterior building cladding can be significantly reduced.

2. Use repetitive formwork

The cost of formwork may be very high and is not given due consideration by the designers. The cost can be reduced when the framing system is used repetitively (10 or more times) on a structure.

3. Use standard column size

This can be achieved by varying the amount of reinforcing steel and the concrete strength within the column. This will allow for a single column form and will minimize the number of variations to meet beam or slab forms.

4. Adopt uniform column layout

Uniform column layout results in simple formwork, which can be used repetitively from floor-to-floor. Similarly, regular-shaped buildings will be more economical than irregularly shaped buildings with L- or T-shaped columns.

5. As far as possible, use the same depth for beams

The saving in formwork and shoring costs will exceed any additional costs for concrete and reinforcing steel. This will also provide a uniform ceiling elevation and minimize mechanical service installation difficulties.

6. Use high strength concrete in columns

The high strength may reduce the column size or the amount of reinforcing steel required for the column.

7. Use high early strength concrete

This will allow for earlier form stripping and will reduce total construction time.

8. Specify self-consolidating concrete

Heavily reinforced columns and beams can be very congested with rebar, which prevents the proper placement of the concrete. SSC maximizes concrete flowability without harmful segregation and dramatically minimize honeycombing and air pockets.

9. Specify locally available materials

The use of local aggregates and recycled materials in concrete makes it a 'green' product, which is requested by environmentally responsible owners.

10. Use the commonly available size of bars and spirals

For a single structural member, the number of different sizes of bars should be kept to a minimum.

11. Use the largest bar size that satisfies the design considerations

Use larger size bars in columns and smaller size bars in slabs. Larger diameter bars reduce the number of bars that must be placed and minimize installation costs.

12. Eliminate bent bars where possible

Bent bars increase fabrication costs and require greater storage area and sorting time on the job site.

13. Avoid the congestion of steel

Congestion of bars should be avoided, especially at beam-column joints, so that all reinforcements can be properly placed.






(Source: Social Media)

Team 
CBEC India


Aug 19, 2019

कंस्ट्रक्शन सेक्टर में इतना रिषेशन क्यों आया हैं? ये हैं वजह।

पिछले कुछ दिनों से सभी सेक्टर में मंदी का माहौल दिख रहा हैं। हालाकि बड़े बड़े कंपनी के शेअर भी गिर रहे हैं। साथ साथ कुछ बड़ी कंस्ट्रक्शन कंपनियों को भारी नुकसान हुआ हैं। और वो अभी भी घाटे में चल रही हैं। और बहुत सारी कंस्ट्रक्शन कंपनियों को ताला भी लग चुका हैं। और कई सारे नए कॉन्ट्रेक्टर ने अपना धंदा  बंद कर दिया हैं। या और कुछ इनकम का रास्ता न होने के कारण घाटे का सामना करके भी काम कर रहे हैं।



वैसे देखा जाये तो कंस्ट्रक्शन का मार्केट 2014 से नीचे उतर रहा हैं। क्योंकि भारत मे सरकार बदल गयी थी। वैसे देखा जाए तो सरकार बदलने का कंस्ट्रक्शन मार्केट पर कुछ असर नही होना चाहिए था। लेकिन ऐसा हुआ है। नए सरकार ने कुछ सख्त कदम उठाए उसका परिणाम सभी क्षेत्रों पर हुआ हैं यह आपको भी पता हैं। लेकिन उसका आगे जाने के बाद बहुत बड़ा फायदा होगा।

कंस्ट्रक्शन मार्केट में मंदी या रिषेशन आने के कुछ मुख्य कारण



नोटबन्दी :

8 नवम्बर 2016 को नया सरकार ने यह फैसला लिया कि 1000, और 500 के नोट चालान से बाहर होंगे। इसका सीधा असर कॅश में व्यवहार करनेवाले छोटे छोटे कॉन्ट्रेक्टर, छोटे बिल्डर और डेवलपर पर हो गया। नोटबन्दी की वजह से छोटे कॉन्ट्रेक्टर का धंदा बैठ गया। जो लेबर कॉन्ट्रेक्टर हुआ करते थे उनका काम रुक गया। उसका और एक अच्छा परिणाम भी दिख गया कि, बहुत सारे कॉन्ट्रेक्टर के पुराने थके हुए बिल भी मिल गए। लेकिन नोटबन्दी के के बाद सब कुछ लीगल होने की वजह से छोटे बिल्डर ने अपना काम स्लो कर दिए औए कुछ लोंगो ने बंद भी कर दिया।




रेरा :

1 मई 2017 से सरकार ने रियल एस्टेट सेक्टर में एक नया कानून लाया रेरा : रियल एस्टेट रेगुलेटरी एक्ट, जो हर एक बिल्डर और डेवलपर को अनिवार्य कर दिया। इसकी वजह से छोटे डेवलपर और बिल्डर को छोटे छोटे काम करने में दिक्कत आने लगी, और सब नए नियम का अनुपालन करने में लग गए। अब कंस्ट्रक्शन सेक्टर में अच्छे बिल्डर और डेवलपर ही टिके रहेंगे। छोटे बिल्डर्स को अगर काम करना हैं रेरा अनिवार्य हैं।





जी एस टी:

नए सकरन ने 1 जुलाई 2017 को वन नेशन वन टैक्स के लिए जी एस टी इस नए टैक्स सिस्टम की शुरुवात की, और पुर मार्किट में एक हड़कंप मच गया लेकिन कुछ सुधार और सरकार की तरफ से सहायता करने के बाद यह कानून अच्छा काम करने लगा, लेकिन शुरू में इसकी वजह बिल्डर, डेवलपर और कॉन्ट्रेक्टर को बहुत ही बड़ा झटका लगा था। क्योंकि हर एक काम और हर एक मटेरिअल पर जी एस टी लग रहा था। और उसका रिटर्न्स हर महीने में करना पड़ता हैं। पहले साल में एक बार ही रिटर्न्स करने पड़ते थे लेकिन जी एस टी में व्यवहार का स्पीड बढ़ाकर महीने के एक बार कर दिया गया हैं। इसकी वजह से ज्यादा हेराफेरी नही कर सकते।





ऑटोमोबाइल सेक्टर:

सब कुछ लीगल व्यवहार होने की वजह से सरकार या इनकम टैक्स विभाग की हर एक व्यवहार पर कड़ी नजर हैं। इसलिए हर एक इंसान गाड़ी खरीदने से पहले सौ बार सोचता हैं। साथ ही साथ महंगाई भी दिन ब दिन बढ़ रही हैं। इस कारण ऑटोमोबाइल सेक्टर में भी मंदी आ गई हैं। हर एक कंपनी अपना स्टाफ कम कर रही हैं। पिछले ही महीने मारुती सुजुकी सेल में काफी गिरावट होने से लगभग 1000 लोगों को कम कर दिया। साथ ही साथ अपने शोरूम भी बंद कर रही हैं। टाटा मोटर्स ने भी अपना प्रोडक्शन कम लर दिया हैं। यह एक बड़े मंदी आने का संकेत हैं।





आईटी सेक्टर :

भारत में बहुत सारी आईटी कंपनियां मल्टीनेशनल हैं। और लगभग सभी शहरों में आईटी हब तैयार हो चुका हैं। उसका सभी इंफ्रास्ट्रक्चर तैयार हैं। सभी कर्मचारी भी लगभग भरे हुए हैं। लेकिन जो फ्रेशर इंजीनियर हैं उनको जॉब मिलने के लिए बहुत तकलीफ हो रही हैं। इस कारण सैलरी पैकेज भी पहले से कम मिल रहे हैं। लेकिन मजबूरी में नए इंजीनियर कम पैकेज में भी काम कर रहे हैं। टेक महिंद्रा, इंफोसिस, टीसीएस, आईबीएम, ऐसे कई सारे बड़ी कंपनी का इंफ्रास्ट्रक्चर पहले से ही रेडी हो चुका हैं।





रियल एस्टेट:

साल 2008 से 2014 इन 6 सालो रियल एस्टेट का मार्केट इतना फ़ास्ट ग्रो होगया हैं की हर सिटी का चेहरा बदल से गया हैं। हर बड़ी सिटी में उसके साथ साथ इंफ्रास्ट्रक्चर का भी डेवलोपमेन्ट लगभग पूरा हुआ हैं। लेकिन पिछले 6 -7 साल में जितने बिल्डिंग बनाके पूरे हुए हैं वो अभी तक पूरी तरह से बिके नही हैं। बहुत सारे बिल्डर और डेवलपर वही बेचने की कोशिश कर रहे हैं। क्योंकि नए नियम बहुत कठोर और सख्त हो गए हैं। सभी बिल्डर और डेवलपर प्रॉपर्टी के दाम कम  करके बने हुये रेडी पजेसेशन फ्लैट और दुकान बेचने की कोशिश कर रहे हैं। लेकिन सब कायदे कानून सख्त होने के करण महंगाई भी बढ़ रही है। साथ ही साथ आईटी सेक्टर में सब इंफ्रास्ट्रक्चर पूरा होने के कारण नए प्रोजेक्ट भी थोड़े कम कम हुए हैं उसके साथ जॉब भी कम होने के कारण हर कोई रियल एस्टेट में पैसा डालने के पहले सौ बार सोच रहा हैं। आज जो रियल एस्टेट के रेट हैं वो आज भी 4 साल पहले के हैं। इधर महंगाई बढ़ रही हैं लेकिन बाकी सब सेक्टर में मंदी होने के कारण रियल एस्टेट भी मंदी में चल रहा हैं। आज भारत मे 6 शहरों में लगभग 4.50लाख से ज्यादा घर पहले ही बन चुके हैं। यह एक प्राथमिक आंकड़ा हैं। सच मे और ज्यादा हो सकते हैं।

कुछ विशेषज्ञ का कहना हैं कि रियल एस्टेट में तेजी आने के लिए लगभग 2 साल का इन्तेजार करना पड़ेगा। उनका यह कहना हैं कि हर एक सेक्टर में तेजी आने के बाद ही कंस्ट्रक्शन सेक्टर में तेजी अति हैं क्योंकि हर कोई इंडस्ट्री अगर बढ़ रही हैं तो उनको नए कंस्ट्रक्शन नए इंफ्रास्ट्रक्चर की जरूरत होती हैं। तभी सब जॉब खुले होते होते हैं और कंस्ट्रक्शन सेक्टर में तेजी आति है।

अब यही गुजारिश हैं कि सब सेक्टर में जल्दी से जल्द तेजी आये और कंस्ट्रक्शन सेक्टर जल्द से जल्द रिकवर हो जाये।





Team
CBEC India

Aug 15, 2019

रेट एनालिसिस मतलब क्या? और कैसे करते हैं हर काम का रेट एनालिसिस?

रेट एनालिसिस 

पिछले कुछ सालों से कंस्ट्रक्शन फील्ड में रेट एनालिसिस को बहुत ज्यादा महत्त्व प्राप्त हुआ हैं। हालांकि अभीतक रेट एनालिसिस के बारे बहुत लोगोंको ज्यादा जानकारी नही हैं। लेकिन पिछले चार से पांच सालोंसे बहुत लोग रेट एनालिसिस की बात कर रहे हैं। इसके कई कारण हैं। 

उसके कुछ मुख्य कारण इस प्रकार हैं।

1. नए और फ्रेशर इंजीनियर को ट्रेनिंग का अभाव।
2. साइट इंजीनियर को वर्क ऑर्डर से दूर रखना।
3. हाथ काम नही हैं इसलिए कोई भी कम लेना।
4. इंजीनियर को रेट एनालिसिस की कम जानकारी होना।




यहाँ पे एक बात बताना बेहद जरूरी हैं कि अगर आपको कोई भी काम आइटम का रेट एनालिसिस बनाना नही आता तो आपको वो काम नही करना चाहिए। अगर आप अभी भी कोई काम बगैर रेट एनालिसिस से कर रहे हैं तो थोड़ा रुकके आपके काम का एनालिसिस करिये नही तो आपका बहुत बड़ा नुकसान हो सकता है।
आज हम इसी पे बात करेंगे कि ये रेट एनालिसिस क्या हैं? ये कैसे करे? क्या क्या करना पड़ेगा? ये सब मुद्दों पर आज चर्चा करेंगे।

आप इंटरनेट पर हजारो साइट सर्च करके कोईभी काम का एनालिसिस आसानी से देख सकते है। 

लेकिन क्या आपको पता है रेट एनालिसिस क्यों बनाना पड़ता है?

आजकल कंस्ट्रक्शन के फील्ड में बहुत ही ज्यादा स्पर्धा हो रही हैं। आपको लगभग हर गली गली में  कई कॉन्ट्रैक्टर और सिविल इंजीनियर दिखाई दे रहे हैं। और हर एक कांट्रेक्टर और हर इंजीनियर खुद को आगे ले जाने की कोशिश कर रहा हैं। हर कांट्रेक्टर खुद के काम मिलने के लिए रेट कम करके भी कम करने की कोशिश कर रहा है। इसलिए पिछले 3 सालों से मटेरियल के रेट बढ़ रहे है, लेकिन लेबर और लेबर कांट्रेक्टर के रेट वैसे के वैसे ही हैं। लेकिन सच बात ये हैं कि बहुत सारे लेबर कांट्रेक्टर हाथ मे कुछ कम न होने की वजह से कम रेट में काम करने में आसानी से राजी हो जाते हैं। लेकिन जब उनकी जेब से पैसा जाने लगता हैं तो छोटे लेबर कांट्रेक्टर काम बंद कर देते हैं। इसमे डेवलपर का भी बहुत नुकसान होता हैं इसलिए रेट एनालिसिस करना बहुत जरूरी है।

रेट एनालिसिस का मतलब किसीभी कार्य का विस्तृत विवरण करना। इसको आसान भाषा मे में ऐसा भी कहा जा सकता हैं। जैसे डॉक्टर किसी बीमारी का इलाज करने के लिए आपरेशन करके, हर एक बातको पता करता हैं वैसे ही इंजीनियर को आपके हर एक काम का आपरेशन करना हैं। 

नीचे एक उदाहरण दिया हैं।

समजो, आपको एक फुटिंग को M25 ग्रेड का 1 क्यूबिक मीटर कंक्रीट करना हैं?
तो आपके दिमाग मे तुरत आना चाहिए। हमारे साइट के मिक्स डिज़ाइन रिपोर्ट के अनुसार हमको हर एक मटेरियल का इस्तेमाल करना चाहिए।


मिक्स डिज़ाइन रिपोर्ट में दिया है कि।
सीमेंट : 345 किग्रा/ क्यू मि
क्रश सैंड: 846 किग्रा/क्यू मि.
10मिमी कोर्स एग्रीगेट : 448 किग्रा/ क्यू मि.
20मिमी कोर्स एग्रीगेट : 731 किग्रा/ क्यू मि.
पानी: 162 किग्रा/ क्यू मि. (पानी और सीमेंट का रेश्यो: 0.47)
एडमिक्चर: 2.07 किग्रा/ क्यू मि.

यह विवरण के मटेरियल की क्वांटिटी में आपको जो चल रहे मार्किट रेट को आपके रेट एनालिसिस के साथ जोड़ना हैं।

लेकिन इसके पहले आपको हर एक मटेरियल का यूनिट देखना पड़ेगा क्योंकि हर एक मिक्स डिज़ाइन किलोग्राम के ऊपर डिज़ाइन किया रहता हैं। लेकिन आपको मार्किट से कोई भी चीज इतनी आसानी से किलो पर नही मिलती तो आगे क्या करे। आपका यूनिट है क्यूबिक मीटर, तो आपको आपके एनालिसिस का यूनिट बदलना पड़ेगा। लेकिन उसके लिए आपको कुछ मटेरियल की DLBD ( Dry Loose Bulk Density), ड्राई लूज़ बल्क डेंसिटी की जानकारी होनी चाहिए। यह हर एक जगह के अनुसार अलग अलग रहती हैं, यह बल्क डेंसिटी मिक्स डिज़ाइन रिपोर्ट में लिखी हुई रहती हैं। रेट एनालिसिस बनाते समय उसको जरुर ध्यान में रखे।
ड्राई लूज़ बल्क डेंसिटी मतलब 1 क्यूबिक मीटर घनता के बॉक्स में लूज़ मटेरियल डालके किया हुवा वजन जो किग्रा/क्यू मि. में होता हैं।



क्रश सैंड:                    1845 किग्रा/क्यू मि.
10मिमी कोर्स एग्रीगेट : 1588 किग्रा/ क्यू मि.
20मिमी कोर्स एग्रीगेट : 1558 किग्रा/ क्यू मि.
पानी:                           1000 किग्रा/ क्यू मि.
कंक्रीट :                       2535 किग्रा/ क्यू मि.

अब इसके आधार से हम हर मटेरियल का यूनिट बदल के मार्किट में चल रहे यूनिट के बराबर लेके आएंगे।
जैसे
सीमेंट : 345 किग्रा : 1 बैग वजन 50 किग्रा : 345/50         : 6.90 बैग
क्रश सैंड: 846 किग्रा/क्यू मि. : 846/1845                        : 0.46 क्यू मि.
10मिमी कोर्स एग्रीगेट : 448 किग्रा/ क्यू मि. : 448/1588    : 0.28 क्यू मि.
20मिमी कोर्स एग्रीगेट : 731 किग्रा/ क्यू मि. : 731/1588    : 0.46 क्यू मि.
पानी: 162 किग्रा/ क्यू मि.  : 162/1000 :0.162 क्यू मि.      :  16.2 लीटर
एडमिक्चर                                                                     : 2.07 किग्रा

अब आपको सब मटेरियल एक यूनिट में मिल गए हैं। अब उसको आपके रेट के साथ जोड़कर आप मटेरियल का खर्चा निकाल सकते हैं। अब लेबर रेट को उसमे मिलाना पड़ेगा। आपको उस एरिया का लेबर का रेट ढूंढना पड़ेगा। और काम करने के लिए लगने वाले मशीनरी का खर्चा उसमे मिलाना पड़ेगा। उसको आप 1% या 2% मिला सकते हैं। 

अब हम फाइनल नतीजे पर पहुंच सकते हैं। 

अपना रेट एनालिसिस अब इसप्रकार होगा।
1 क्यू मि कंक्रीट का रेट एनालिसिस
1. सीमेंट : 6.90 बैग X Rs. 265.00/ बैग                                                         = Rs.1828.50
2. क्रश सैंड : 0.46 क्यू मि. X 
Rs. 1095.00/ क्यू मि                                         =Rs. 501.92
3. 10मिमी कोर्स एग्रीगेट, (खड़ी/मेटल) : 0.28 क्यू मि.X 
Rs. 953.00/ क्यू मि. = Rs. 268.96
4. 20मिमी कोर्स एग्रीगेट (खड़ी/मेटल): 0.46 क्यू मि. X 
Rs. 953.00/क्यू मि.   =Rs. 438.86
5. पानी: 16.20 लीटर X 
Rs. 0.086/ लि.                                                         = Rs. 1.40
6. एडमिक्चर: 2.07 किग्रा X 
Rs. 70.00/किग्रा                                                = Rs. 144.90
टोटल मटेरिअल का खर्चा :                                                                       = 
Rs. 3184.55
प्लांट और मशीनरी : 2% :                                                                        =
Rs. 63.69
कंक्रीटिंग लेबर :                                                                                       =
Rs. 550.00/ क्यू मि.
टोटल मटेरियल और लेबर                                                                        = 
Rs. 3798.24
वॉटर & इलेक्ट्रिसिटी चार्जेस 2.00%:                                                       =
Rs.75.96
ओवरहेड्स (स्टाफ, ऑफिस, एडमिन): 5% :                                          =
Rs.189.91
1 क्यू मि कंक्रीट का मटेरियल, लेबर, मशीनरी और ओवरहेड का कुल रकम: 
Rs. 4064.11
अब आप आपका 10% प्रॉफिट उसमे ऐड करे                                             = 
Rs. 609.62
अब सब मिलाके आपका 1 क्यू मि. कंक्रीट करने के लिए कुल 
Rs. 4,673.73 मतलब लगभग Rs.4675.00 का रेट तय कर सकते हैं। 




लेकिन हर रेट एनालिसिस के रेट बाजार भाव के हिसाब से बदलते रहते हैं। यहाँ हम आपको बस यह बताना चाहते हैं कि, हर एक आइटम का रेट इसी तरस से आप निकाल सकते हैं। यह रेट एनालिसिस बनाना एक स्किल हैं और आप उसे जरूर हासिल करें। रेडीमेड रेट एनालिसिस देखने के बजाय आप खुद से रेट एनालिसिस बनाना सिख ले। 

कंस्ट्रक्शन में आप कौनसे काम का रेट एनालिसिस बना सकते हैं?

1. एक्सकैवशन : खुदाई.
2. बैक फिलिंग : मिट्टी या मुरुम का पुनर्भरण
3. रबल सोलिंग
4. पीसीसी, आरसीसी ,स्टील और शटरिंग
5. बांधकाम और प्लास्टर
6. वॉटरप्रूफिंग
7. फ्लोरिंग
8. दरवाजा और खिड़की
9. फेब्रिकेशन
10. पेंटिंग
11. प्लंबिंग
12. इलेक्ट्रिकल


हर एक इंजीनियर को इन सब काम के हर एक आइटम का रेट एनालिसिस बनाने के लिए एना चाहिए। यही हमारा लक्ष्य हैं। कि हर सिविल इंजीनियर और कांट्रेक्टर टेक्निकली स्ट्रॉन्ग होना चाहिए।


अगर आपको रेट एनालिसिस बनाते समय कुछ भी परेशानी आये तो आप हमें director.cbec@gmail.com पर मेल करें। हम आपकी जरूर सहायता करेंगे।



Team
CBEC India

Aug 12, 2019

Waterproofing Contractor : M/s. Adhav Enterprises


M/s. ADHAV ENTERPRISES






                     Nowadays there is heavy rainfall everywhere and due to fast construction process waterproofing work is not doing as per standard quality, every contractor want to complete his site on time, but they are not giving proper time to waterproofing work, as well as lack of supervision and lack of knowledge about waterproofing work procedure. Therefore many peoples in bungalows, as well as apartments,  are facing these common issues of leakages.


Sometimes due to fast completion and lack of technical knowledge waterproofing work done as a typical process, which is not satisfactory. In the rainy season, the lots of peoples are facing Seepage issue, toilet chokes up. Leakage in toilets, etc. actually water leakage is very dangers issue because this immediately reduces your constructions life.


To stop all types of leakages from your apartment one company is providing service in Maharashtra. Nowadays currently working in Pune and Around Pune area. The Company Name is M/s. Adhav Enterprises.


M/s. Adhav Enterprises is a Trusted Name in Waterproofing agencies at Maharashtra. They are providing the service of Maintenance, as well as without breaking waterproof with a guarantee.
This agency is Authorized Waterproofing Contractor of FOSROC. Whos is a trusted brand in Construction chemicals. M/s. Adhav Enterprises is providing all waterproofing services in Pune from the Last 10 years. They have a lot of clients who are well known and reputed in this area.  
Services from M/s. Adhav Enterprises.

M/s. Adhav Enterprises Providing Following Services.

Bar Anchoring:

8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm Tor steel Bar Anchoring with FOSROC Chemical as per standard Norms and as per requirements.

Expansion Joints:

Providing Services and Material for Building Expansion joints as well as road expansion joints.

Injection Grouting:

Injection Grouting with Pressure under the observation of technical Person without any breaking of structure.

Brick Bat Coba:

Laying 4inch thick Brunt brickbat Coba with the cleaning of slab and beam joints Basecoat with chemical and Cement grouting and injection grouting.

Toilet Bathroom Leakage and Repair Works:

Repairing of Leakages in the old apartment as well as bungalows without breaking any old structure or without damage existing structure.

Wall Crack Filling:

After certain time external and internal wall are shows cracks those are due to the heat of hydration or due to material quality, we need to do its care by periodical painting on it, before painting work need to fill its crack by Crack seal, then external and internal wall life will be increased.

 All Type of Chemical Coating work.

After cleaning of Slab and Beam need to Apply Chemical coat on the slab to prevent leakages. This is by brush application or sometimes need to mix with cement paste.

Epoxy coating and Epoxy Joint Filling Work:

Epoxy the coating generally use in Industries, because this epoxy coating is done on smooth finish trimix work. This is process is generally used in industrial shed, The top terrace of apartments, Water tanks, etc.

All type of Building Maintenance work:

Waterproofing Repairing, Chamber Repairing, Plumbing Repairing, Etc. Maintenance Work regarding Building or apartments is done by us. Currently, these services are providing by us in all over Pune. Now we are expanding in all over Maharashtra.

All Waterproofing work is done with the advanced technology with the help of advanced types of equipment and advanced construction chemicals as well as we are giving waterproofing guarantee. Also, we will be providing on-call services about building maintenance all over Pune.

M/s Adhav Enterprises in Trusted Name of Waterproofing, and registered at Just dial which is India's biggest marketing company. As per Just Dial M/s. Adhav Enterprises is a 5 Star Rating Company.


Contact Details of

M/s. AdhavEnterprises.

Proprietor : Mr. Nilesh Adhav
Contact Number : 9552033008; 9850955186; 7722073417.
Address: S. No. 140/5, Ghule Nagar, Manjari Budruk, Manjari- Mundhwa Road, Pune- 412307.




Team
CBECIndia.


(Note: This information is provided by client/client representative, CBEC is not responsible for any mismatch of information or not responsible for any reviews from the reader, we are not responsible for any financial issues this page is a just mediator to reach up to more peoples)


Aug 8, 2019

Aluminum Window : M/s Jai Bhavani Glass & Aluminum Works


As per the changing world, the design and look is changed of window, now the window is just not for ventilation purpose it is also using for elevation and architectural features.

Types of Windows using for Building Work

Aluminum sliding window
UPVC Sliding Window
Wooden Window.
MS Window



These days all Peoples are using Aluminum windows because these windows prices are bearable to all and repairing is easy as compare to others. And aluminum window material is easily available in the market. As well as its labour will be easily available. Finishing of Aluminum window is too good than the wooden window. wooden window needs to do periodical maintenance but Aluminum window need less maintenance than Wooden Window, 

Currently, there are a lot of companies are doing this work like aluminum window fixing as well as glass fixing work.

Some of those companies M/s Jai Bhavani Glass & Aluminum works are doing very good work all over Pune. and Maharashtra also. This company has to provide a lot of Verities of the product with quality material as per industry standards.





Visit at Site.
Finalize the Rate as per Specification
Checking Actual Site Measurement.
Material Procurement.
Cutting of Material
Frame Making and Glass Fixing.
Transportation to Site. (Optional as per Site Condition, Can be Prepare at Site also.)
Fixing of Frame & Sliding Door/Window.
Fixing of Lock.







With the help of experience, Mr. Nilesh Shinde is moving forward in this industry. He is the Proprietor of this firm which is providing his services all over Maharashtra as per client requirement. He is also Specialist in All types of Aluminum sliding Windows, Fall Ceiling, Office Partition Door, Syntax Door, and Glass Fitting and Repairing Work.



20 Guage 3 Track Sliding Windows: Rs. 170.00 per Sqft.
20 Guage 3 Ft X3 Ft :3 Track Aluminum Window: Rs. 2000.00 Per Nos
20 Guage 2 Track Sliding Window: Rs. 150.00 per Sqft
20 Guage 3 Ft X3 Ft: 2 Track Sliding Window: Rs. 1500.00 per Nos

18 Guage 3 Track Sliding Windows: Rs. 190.00 per Sqft.
18 Guage 3 Ft X 3 Ft :3 Track Aluminum Window: Rs. 2300.00 Per Nos
18 Guage 2 Track Sliding Window: Rs. 170.00 per Sqft
18 Guage 3 Ft X 3 Ft: 2 Track Sliding Window: Rs. 1700.00 per Nos

Jindal Anodizing Window
18 Guage 3 Track Sliding Windows: Rs. 250.00 per Sqft.
18 Guage 3 Ft X 3 Ft :3 Track Aluminum Window: Rs. 2700.00 Per Nos
18 Guage 2 Track Sliding Window: Rs. 215.00 per Sqft
18 Guage 3 Ft X 3 Ft: 2 Track Sliding Window: Rs. 2300.00 per Nos

Jindal Powder Coating Window
18 Guage 3 Track Sliding Window: Rs. 230.00 per Sqft.
18 Guage 3 Ft X 3 Ft :3 Track Aluminum Window: Rs. 2500.00 Per Nos
18 Guage 2 Track Sliding Window: Rs. 200.00 per Sqft
18 Guage 3 Ft X 3 Ft: 2 Track Sliding Window: Rs. 2100.00 per Nos

Bathroom Louvers
Box Section 4in.X1in. With Mosquito Net: Rs. 250.00 per Sqft.
Box Section 2in.X1in. With Mosquito Net: Rs. 180.00 per Sqft.

Bathroom Door
Bathroom Door without Frame: 2000.00 Per Nos.

Partition Fixing: 150.00 per Sqft
Partition with Door: 250.00 per Sqft.




Those rates are as per Current market the situation, as per 15 days Payment Schedule.

That rate will be changed as follows.
Change in Specification,
Change is Market Rate
Project Quantity
Change in Payment Schedule.

Taxes will be payable extra as actual and as per Government Rule.





Proprietor: Mr. Nilesh Shinde.
Contact Details: 9921410352; 8208426576
Email id. : shindenilesh40@gmail.com
Address: Susgaon Nande Road, Bhote Vasti, Susgaon, Pune 411021.



Team 
CBEC India

(Note: This information is provided by client/client representative, CBEC is not responsible for any mismatch of information or not responsible for any reviews from the reader, we are not responsible for any financial issues this page is a just mediator to reach up to more peoples)

Aug 2, 2019

B G Shirke Biography

Padma Shri B G Shirke Biography

Padma Shri Baburao Govindeao Shirke the legend of Civil Engineering in India.
They are from a humble family and born on 1 August 1918 at Pasarni Village in Satara, Maharashtra, India.

Complete high school from wai and degree of civil Engineering from College of Engineering Pune. He is the 1st Civil Engineer from Pasarni Village.

After completion of Graduation, they worked with some government organization but not succeed. after that they associate with Kirloskar group and founded a company in 1944, Then BG Shirke Construction Technology Pvt. Ltd. never see behind and goes up to 12000 Employee with Rs. 2500 Cr. Turnover.

B. G. Shirke Construction Technology Private Limited (BGSCTPL), formerly known as B. G. Shirke & Company, was established in 1944 by its Founder Chairman, Mr. B. G. Shirke.
and Now BG Shirke Construction Technology Pvt. Ltd. is a multi-disciplinary civil, mechanical and electrical engineering organization having international technology tie-ups and over 12,000 workforces.

It is a vibrant, dynamic and integral part of modern India, significantly contributing to industrial, economic and social progress.

BGSCTPL also plays an active role in protecting and preserving the country’s eco-systems – its forests and waterways.  Company is well established in the civil engineering field for over 65 years.
The Mission to Industrialize Civil Engineering in the gigantic effort to provide affordable, high-quality mass housing has already been achieved with Herculean efforts and unique unflinching dedication.

BGSCTPL is endeavoring to spread and entrench Industrialized Civil Engineering Technology throughout the country for the good of all.

BGSCTPL also pioneered and patented the ‘3-S’ system in India – a system using partial pre-cast structural components, such as dense concrete hollow core columns, dense concrete partially pre-cast beams, lintels, staircases, etc., and Siporex blocks and slabs to achieve strength, safety, and speed.
The Company has so far executed more than 2,00,000 dwelling units using ‘3 S’ system, both in India and Overseas, in all types of climatic conditions and heavy rainfall areas.

At present, it executes very large housing, industrial and commercial projects in India on Turnkey Lumpsum Basis by the use of proven prefab products and/or also by the conventional methods and materials. It also undertakes projects on Turkey Lumpsum Basis including Planning, Designing, and Execution. ‘3 S’ system of building construction has been used successfully for high-rise residential buildings up to 25 stories.

BGSCTPL has also expertise in design, fabricate and erection all types of heavy steel structures, shuttering and centering.

Of late, to move with times, BGSCTPL has diversified in infrastructure developments and completed two road projects on NH-4 between Pune-Satara-Kolhapur, part of a “Golden Quadrilateral” and one road project at Panvel.

BGSCTPL has developed expertise in the construction of Highways, Bridges and Marine Structures as well.

Over the years, BGSCTPL has acquired expertise in the field of construction in the following areas using Conventional as well as prefab technology and resources.
Mass Housing Projects
Residential Multistoried Buildings
Commercial Buildings
Industrial Buildings/Sheds
IT Parks
Roads
Bridges, Flyovers,
Underpasses
Sports Facilities/Complexes
Hotels,
Auditoriums
Airports

BGSCTPL is registered in the highest/unlimited special class/category with many organization and track record of repeated orders from many vendors endorse our reputation and capabilities.
Public Works Department (PWD) Maharashtra, Karnataka, Andhra Pradesh  and
Tamilnadu Military Engineering Services (MES)
Brihanmumbai Municipal Corporation (BMC)
Pune Municipal Corporation (PMC)CIDCO of  Maharashtra Ltd.Maharashtra Housing & Area Development Authority (MHADA)
Pimpri Chinchwad Municipal Corporation (PCMC)
Pimpri Chinchwad New Town Development Authority (PCNTDA)
Karnataka Housing Board (KHB)The Singareni Collieries Co. Ltd. (SCCL)
Maharashtra State Electricity Board (MSEB)
Delhi Development Authority

Integrated Management System (IMS)
BGSCTPL is IMS registered organization, which covers ISO 9001:2008, ISO 14001: 2004 and OHSAS 18001:2007 for Quality, Environment, Health, and Safety. Det Norske Veritas (D.N.V) Certification B.V., The Netherlands, has awarded IMS Certification.
scope of certification is “Design, Development, and Construction of mass residential, Commercial, Industrial buildings and Infrastructure works like roads, bridges, flyovers, culverts.”

Grading Certificate
BGSCTPL have received GRADING CERTIFICATE from investment information & Credit Rating Agency (ICRA)/ Construction Industry Development Council (CIDC) assigning CR2+ grading which indicates Strong Contract Execution Capacity with respect to contracts with values up to Rs. 500 crores and aggregate values of work to be executed within a year of up to Rs. 1400 crores.



For these Achievements in the Construction industry, Mr. B G Shirke is awarded by Padma Shri in 2003 from Hon. Former President Abdul Kalam at the age of 85 years. and at the age of 92, on the date of 14th August 2010 he is no more. but before that, they have successfully handed over his business to his Children Mr. Vijay Shirke.




They have 3 Children's.
1. Vijay Shirke, 2. Pratap Shirke, 3. Ajay Shirke.
Mr. Vijay Shirke is Handling Construction Business.
Mr. Ajay Shirke is Associated with Maharashtra Cricket Association.
Mr. Pratap Shirke is out of India for business purpose.

On this101th year this is a tribute to Padma Shri Baburao Govindrao Shirke.
They are the real inspiration of New civil engineers.









Team
CBEC India.



Aug 1, 2019

Rate Analysis of PCC : (Plain Cement Concrete)

Rate Analysis of PCC
(Plain Cement Concrete)


     This is used at below any foundation to make a clean and level surface for easy to work, away from sand, dust, mud, etc. This is the temporary structure created to ease your work. PCC is not a Structural Member which can bear any load or pressure. But this plays a very important role when foundation work is going on. PCC will help to keep it as per measurement and as per design.

Sometimes the natural ground has too much uneven surface, in those situations, there is doing Plum concrete. That means 60% of Natural Hard Stone and 40% of Plain Cement concrete will fill with doing some shuttering work to control Size. This will help to create a plain Surface to ease the work.

General Use of Plain Cement Concrete (PCC)

1. Below Footing
2. Below Raft
3. Below Concrete Road
4. Below Grade Slab
5. Below Box type Waterproofing
6. At Labour Camp
7. Work Station of Labour Like Steelyard, Cutting yard, etc.
8. In Godown or Store Room.
9. In Site office.
10. In Plum Concrete at uneven Surface.

In above location, PCC can be done at Normally to work easily.
but What about Plum Concrete Work. Plum Concrete is used at Uneven surfaces to Fill it by Plum Concrete of 60% of Rubble and 40% of Plain Cement Concrete.
sometimes plum concrete can be used at Low bearing capacity soil, but This should be used for small structure not for Building, tower or any big structure because Plum concrete is also not a structural member who can bear load and pressure.

Here we have given some example of Rate analysis of Plum Concrete and Plain Cement concrete (PCC).


Rate Considered: (All Rate is Basic Rate Taxes and Transportation to consider extra)
Cement: Rs. 265.00/Bag
Crush Sand: Rs. 1095.00/cum i.e. Rs. 3100/Brass
Course Aggregate 10mm: Rs. 953.00/cum i.e. Rs. 2700/Brass
Course Aggregate 20mm: Rs. 953.00/cum i.e. Rs. 2700/Brass
Fly Ash: Rs. 2.00/Kg
Admixture: Rs. 48/Liter up to M25 or Rs. 66/Liter above M30
Labour: Rs. 805/Cum
Extra Overheads: Rs.950/Cum (This cost considered Including Transportation, Shifting, Water Electricity, Housekeeping, PF/ESIC.Etc.)

 In General Condition Lot of builders and Subcontractors are sublating this work on Sqft basis or Per Bag basis to Subcontractor or Concrete gang Who can do it on PCC Rs. 6.00/ Sqft and Plum Concrete in 8.50 to 9.00 Rs. Per Cuft that is 300 Per Cum



PLUM CONCRETE (60:40)Ratio

Quantity : 1.00 Cum



Material
Labour
Material
Unit
Constant
Rate
Amount
Total Amount
Labour
Unit
Quantity
Rate
Amount
Total Amount
Cement
Bags
1.15
       265
        305.70
1311.50
Labour work for RCC
Cum
1.00
450.00
        450.00
         981.60 
Crush Sand
Cum
0.20
    1,095 
        216.68
Material handling charges
0.5%
      6.56
Course Aggregate 10- 12 mm
Cum
0.10
       953
          99.08
Overheads
Cum 
1.00 
525.00 
525.00 
Course Aggregate 20 -25 mm
Cum
0.25
       953
       236.12
Fly ash
Kg
33.60
           2
        50.40 
Rubble 
Cum
0.60
        673
  403.54


TOTAL RATE: Rs. 2293.10/Cum Say Rs.2294.00/Cum
(Shuttering Cost is Extra)

Rate And Material Analysis of PCC: Plain Cement Concrete


 PCC 05 (1:4:8)

Quantity: 1.00 Cum

Material
Labour
Material
Unit
Constant
Rate
Amount
Total Amount
Labour
Unit
Quantity
Rate
Amount
Total Amount
Cement
Bags
2.06
       265
        545.90
2208.51
Labour work for RCC
Cum
1.00
805.0847
        805.08
         1,766.1
Crush Sand
Cum
0.67
    1,095
        729.82
Material handling charges
0.5%
          11.04
Course Aggregate 10- 12 mm
Cum
0.31
       953
        297.74
 Overheads
Cum 
1.00 
950.00 
950.00 
Aggregate 20 -25 mm
Cum
0.47
       953
        451.44
Fly ash
Kg
84.00
           2
        126.00 
Admixture up to M30
Kg
1.20
         48
          57.60

TOTAL RATE: Rs. 3974.60/Cum Say Rs. 3975.00/Cum
(Shuttering Cost is Extra)


 PCC M10 (1:3:6)

Quantity: 1.00 Cum

Material
Labour
Material
Unit
Constant
Rate
Amount
Total Amount
Labour
Unit
Quantity
Rate
Amount
Total Amount
Cement
Bags
2.88
       265
        764.26
2327.54
Labour work for RCC
Cum
1.00
805.0847
        805.08
         1,766.7
Crush Sand
Cum
0.49
    1,095
        541.70
Material handling charges
0.5%
          11.64
Course Aggregate 10- 12 mm
Cum
0.26
       953
        247.69
 Overheads
Cum 
1.00 
950.00 
950.00 
Course Aggregate 20 -25 mm
Cum
0.62
       953
        590.29
Fly ash
Kg
84.00
           2
        126.00
Admixture up to M30
Kg
1.20
         48
          57.60

TOTAL RATE: 4094.30 Say Rs. 4095.00/Cum
 (Shuttering Cost is Extra)

PCC M15 (1:2:4)

Quantity : 1.00Cum

Material
Labour
Material
Unit
Constant
Rate
Amount
Total Amount
Labour
Unit
Quantity
Rate
Amount
Total Amount
Cement
Bags
4.94
       265
     1,310.16 
2967.24
Labour work for RCC
Cum
1.00
805.0847
        805.08
         1,769.9
Crush Sand
Cum
0.58
    1,095
        631.73
Material handling charges
0.5%
          14.84
Course Aggregate 10- 12 mm
Cum
0.34
       953
        325.98
Overheads
Cum 
1.00 
950.00 
950.00 
Course Aggregate 20 -25 mm
Cum
0.56
       953
        531.52
Fly ash
Kg
73.50
           2
        110.25
Admixture up to M30
Kg
1.20
         48
          57.60

TOTAL RATE: 4737.20 Say Rs. 4740.00/Cum
(Shuttering Cost is Extra)


In above analysis, We have Considered the Material Density as Follows.

1. Cruah Sand : 1600 Kg/Cum
2. 10mm Metal : 1560Kg/Cum
3. 20mm Metal: 1550kg/Cum

All the Details are given in mix design report which is prepared for your site and the mix design depends on quarry material. Material Density can be changed as per Quarry location and Material quality, as well as Cement content, can be changed as per quarry Material quality.

Generally A lot of Builders, contractors are using thumb rule when doing PCC work.

 General The market rate of PCC work.

PCC with Material: Rs. 3500-4000/Cum
PCC only Labour: Rs.400/Cum
100 to 150mm thick PCC only Labour: Rs.6.00/Sqft
Plum Concrete Only Labour: Rs.8.50-9.00/Cuft That is 300/Cum
Cement Bag: Rs.50- 60/Bag.
Shuttering With Material: Rs.450-550/ Sqm 


All above Rates is current market rate and analysis are considered as per Mix design report. Which is Change as per the location and Mix Design Report, 
you can refer the format and can try preparing your site analysis as per your site mix design.

If you need its soft copy in excel format with formula please mail us on director.cbec@gmail.com




Team
CBEC India